GWTW Forum
November 27, 2014, 05:29 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News:
 
   Home   Help Forum Info Login Register Chat  
Welcome to the GWTW Forum.
Guests (non-registered users) can view the forum but are unable to post.  If you don't have anything to say then why would you bother to register?
One of the most popular sections of the GWTW Forum has long been the Swap Meet.  A great place to sell old, seldom flown kites or to get great deals on used (gently flown) kites.  Only registered users can see the Swap Meet section, let alone wheel and deal.  1000's (literally) of kites have changed hands thanks to the Swap Meet.
There are several more benefits to being a registered user, but you'll have to join our little community to find out all the "secrets".
Questions or concerns? Contact Steve ... just drop an email to: forum.gwtwkites@gmail.com

Pages: [1]   Go Down
  Print  
Author Topic: Silver Fox 2.3 Std. - leech line tensioner.  (Read 591 times)
0 Members and 1 Guest are viewing this topic.
srcoleman
Trade Count: (0)
*
Offline Offline

Posts: 4

Location:

« on: September 21, 2013, 09:27 PM »

Can anyone advise me how to set up the leech line tensioner on my new Silver Fox 2.3?
Instruction sheet that came w/ the kite is mute on the leech line tensioner and difficult to interpret on the LE tensioners. I think I've got the LE figured out, but can't figure out how the bungee tensioner works w/ the Dyneema leech line.
Any guidance would be much appreciated!
Logged
Hadge
Trade Count: (0)
****
Offline Offline

Posts: 625


Location: Lincolnshire, UK

« Reply #1 on: September 22, 2013, 02:17 AM »

Basically the leech line controls the amount of tension in the trailing edge of the kite.

With a looser leech line the trailing edge can vibrate a little which will slow the kite down and improve the precision of the flying but it will be more noisy. It can be useful to loosen the leech line in strong winds to slow the kite down.

With the leech line tighter the trailing edge will not vibrate as much so the kite will fly more quickly and more quietly but will not be quite so precise.

If the adjustment on the Siver Fox is the same as the FW Soul  you will have a length on bungee over the centre 'T' with the leech lines looped to the either end of the bungee with a Larkshead knot.  With the kite assembled, move the Larksheads up the bungee towards the centre 'T' to tighten the leech line and away from the Centre 'T' to loosen it.  Make sure both sides are evenly adjusted.

Try flying the kite as it is and then adjust it if needed.  I like mine so it is quiet in normal (8-12 mph) winds and just starts to vibrate a little as the wind gets higher.
Logged

Age and cunning will always overcome youth and skill!

In the bag - HQ Shadow, Prism 4D, Flying Wings Soul Mid Vent, HQ Jive (1), Spiderkites Zodarion, 'Paw' modded HQ Maestro ll, HQ Delta Hawk.
srcoleman
Trade Count: (0)
*
Offline Offline

Posts: 4

Location:

« Reply #2 on: September 23, 2013, 06:12 PM »

Thanks for the info.
This kite has the bungee tied to the keel above the T with the other end hanging down with a simple overhand knot at the end. The leech line is a single Spectra line from wingtip to wingtip with a loop coming up from the inner ends of the trailing edge toward the bungee. I think the lark's head would likely grip the braided jacket on the bungee since it will be kept in tension. I'll give it a try!
I appreciate your help!
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  


kmacFab
kmacFab

Kite Classifieds Ad
Kite Classifieds

A Wind Of Change
A Wind Of Change

Untitled Document
Untitled Document

A Wind Of Change
skyshark

Kitebookie
Kitebookie.com

Untitled Document

Untitled Document
Untitled Document

Our forum is made possible by the good folks whose ads appear above and by the members of our community (PayPal donation button at bottom)
In case you missed it each ad is linked to the sponsors web site.  So please, take a moment and visit our sponsors sites as this forum wouldn't be possible with out them.
Interested in running an ad for your business or kiting event?  Contact Steve at advertise.gwtwkites@gmail.com for a quote.

Cal Custom

Support the GWTW Forum

Powered by MySQL Powered by PHP Powered by SMF 1.1.8 | SMF © 2006-2008, Simple Machines LLC
SimplePortal 2.2.1 © 2008-2009
Valid XHTML 1.0! Valid CSS!