Help needed: Connector settings for Ghost

[Welcome to the GWTW Forum]

Welcome to the GWTW Forum.
Guests (non-registered users) can view the forum but are unable to post.  If you don't have anything to say then why would you bother to register?
One of the most popular sections of the GWTW Forum has long been the Swap Meet.  A great place to sell old, seldom flown kites or to get great deals on used (gently flown) kites.  Only registered users can see the Swap Meet section, let alone wheel and deal.  1000's (literally) of kites have changed hands thanks to the Swap Meet.
There are several more benefits to being a registered user, but you'll have to join our little community to find out all the "secrets".
Questions or concerns?  forum.gwtwkites@gmail.com

[lasapcheong]

Double post from FA forums but no reply so far (which is strange) so trying my luck here. Hope its not against the rules here

Hi.

I gotten a new Cosmic Ghost a while ago. First flight was sweet but after a few sessions it seemed that something doesn't feel too right. My Ghost seems to need more wind to fly now.

Would appreciate if folks here can provide the bridle measuremts. I have their manual but from the outset Straight out of the box the measuremts are already off by a few centimeters.

Also most importantly does anybody have the measurement from the nose to the ULE and LLE APA connectors? I have a feeling that they might not have been setup correctly.

Thanks in advance

Thanks
Darryl

[inewham]

Have you tried emailing Kitehouse?

[lasapcheong]

Ye I did more than 2 weeks ago, in English (did not use a German translator). No reply since.

Darryl

[gwm]

  Hi Darryl,
 I measured from the top of the spar, inside the nose. (you can feel right where the rod ends - I thought it might be easier to get an accurate measurement)
 to the bottom of the leading edge connectors where they butt up against the c-clips
 The left side:
   top to ULE conn. - 15 inches or 38.1 cm
   top to LLE conn. - 39 5/8 inches or 100.64 cm

 The right side measurements are about 3mm shorter

   I heard there was an online manual for this kite. Does anyone have one they could e-mail to me?
  Thanks,
   Gary

[lasapcheong]

  Hi Darryl,
 I measured from the top of the spar, inside the nose. (you can feel right where the rod ends - I thought it might be easier to get an accurate measurement)
 to the bottom of the leading edge connectors where they butt up against the c-clips
 The left side:
   top to ULE conn. - 15 inches or 38.1 cm
   top to LLE conn. - 39 5/8 inches or 100.64 cm

 The right side measurements are about 3mm shorter

   I heard there was an online manual for this kite. Does anyone have one they could e-mail to me?
  Thanks,
   Gary

Thanks Gary! Very helpful of you.

I have the manual. I've emailed it to you already.

Darryl

Our forum is made possible by the good folks whose ads appear in the right margin of the forum and by the members of our community (PayPal donation button at bottom of the page)
In case you missed it each ad is linked to the sponsors web site.  So please, take a moment and visit our sponsors sites as this forum wouldn't be possible with out them. >>>
Interested in running an ad for your business or kiting event?  Contact Steve at advertise.gwtwkites@gmail.com for a quote.